Sinjimoru

Jabara Overhead Stand

Stable Grip

Convenient View

Compatible for widths 5.4 inches to 14.6 inches

Easy-to-use Angle adjustment

Try Sinjimoru Jabara Overhead Stand now.

Compatible with all devices

The high intensity of its carbon steel material makes it a sturdy & strong stand for all sizes of devices from small-sized smartphones to large tablets.

Strong Fixation

Double-spring construction provides an easy angle adjustment. Shape your stand and fix it with three tension screws.

Anti-slip Pad

Silicon pads on both sides keep the grip from falling and more than 1000 grip tests were done to prove its high quality.

1. Put the stick onto the plate and screw it until it has a firm hold.

2. Start the assembly of the head clamp.

3. Put the screw bolt onto the jib part first.

4. Connect the head clamp with the jib part by pressing it onto it.

5. Spin the screw bolt towards the head clamp to fasten it.

6. Put the lower end of the jib part into the upper part of the standing stick and spin it to assemble the two parts together.

7. Loosen the screw/bolt on the standing stick, adjust the height to the desired level, and fix the screw again.

8. Use the 3 screws for adjustment on the jib part of the overhead stand to adjust the holding angle to the weight of the device it is holding.

1. Open the clip part according to the thickness of the surface you wish to assemble it on, and turn/spin the handle of the clip part to fasten it to the respective surface.

2. Insert the jib part into the clip part and fasten it (so that the jib part is facing upwards).

3. Start with assembling the head clamp.

4. Put the screw bolt on the upper part of the jib.

7. Adjust the jib part using the 3 screws according to the weight of the device you want it to hold.

5. Assemble the head clamp onto the round upper part of the jib, using some strength.

6. Fasten the head clamp to the jib by screwing the screw bolt towards the end of the jib in the direction of the head clamp, until it is fixed.